How to update your videocon zeus from 1.6 stock to 2.1 Eclair
Warning This will void your warranty !!! And i am not responsible if you brick your phone !!! :)
But i think you cant brick it .. there will be some hope finally at the service center though !!
This procedure is very simple and tension free :)
Few things you need to do this
1. Spice Mi 300 official update utility Get it >> here
2.SUT-LR update Tool Get it >> HERE
you will see
Click NEXT
Click NEXT
Click NEXT
Wait Till it finishes
It will close automatically and opens up a new window
DO NOT PRESS NEXT BUTTON or DO NOT CLOSE IT
COPYING THE 2.1 FLASH FILE:
Phone should be connected with the USB to the PC else connect it
Then
then
update successfull !!!
press FINISH or CONTINUE if you want to update to another ROM any thing as you like :) immediately :)
This is just because the reboot failed.. just power on manually and it should all work well.
But i think you cant brick it .. there will be some hope finally at the service center though !!
This procedure is very simple and tension free :)
Few things you need to do this
1. Spice Mi 300 official update utility Get it >> here
2.SUT-LR update Tool Get it >> HERE
PREPARING FOR UPDATE:
As you have downloaded Spice Éclair update MI-300-Eclair-Software-Updater-Tool.zip already
Extract it to a folder on your pc
Open the folder and Install it by running Setup.exe
Go to your installation folder .. normally ….
C:\Program Files\Software Update Tool Setup\
Copy file named F0X-219M-0-5015-A01.nb0
Paste it somewhere safe.
Once you are sure that the file is copied out of that folder to some other place.Then only close the window.If you accidently press next It will try to update the phone software .. This might work or might not work i got error .. Do not close this window until you make sure you have copied the File F0X-219M-0-5015-A01
i will try to upload this file to some place so you can safely start from the next step
INSTALLING SUT-LR UTILITY:
I hope you already downloaded the Software Update Tool from here SUTLR.ZIP else download it
Extract it to some folder
Then install it by running the Setup.exe inside
Then start SUT-LR program
it will open to show a screen like this
Connect your phone to the pc using USB cable
Click NEXT
Browse to the folder where you copied the F0X-219M-0-5015-A01.nb0
The screen should show phone is connected.(just making sure drivers are installed :)
Optionally ( I think its better to ) select ERASE DATA
PHONE IN DOWNLOAD MODE
TURN OFF your phone
Start to Download Mode ( Press Red + Vol Up + Power Key )
It should show
Flash item : SAMSUNG KG45G(&^%
Modem REV FXX-2-19M-00
incomming download mod
blah blah blah ….
Don’t have to rush let it go…printing….
Now click NEXT on the SUT-LR utility
Finally it should give you a screen saying
Either UPDATE Success or with an error code 4x0000 something don’t worry just try to manually switch on your phone it should work fine.
This method can be used even on a bricked phone which is not booting.So this should work fine or else try again don’t panic J you can always go to Videocon service center and fix it if something terrible happens. I have tried it again and again it worked fine. I even came back to 2.1 and then went up to 2.2.1 .. now I am looking for a 1.6 stock rom so I can try to come back to 1.6 stock. I will update this post as and when required.
Please share it if you find it useful…… J
Those who successfully done the update please post a comment/feedback. I might be integrating the VIDEOCON Startup and Boot Animation soon … so it will look like a stock version J
Thanks for the post...its a very detailed step mentioned by you.
ReplyDeleteBut after trying for two three times also i was unable to update my phone. can you give some suggestions.